Mortgage refused due to spray foam
We remove the foam, dry the timbers, and issue a dated photographic report in the format lenders accept. Most Weston super Mare sales we unblock complete within three weeks of extraction.
Attic Spray Foam Removal in Weston super Mare clears failed spray foam from lofts across Somerset so timber can dry and your roof can breathe again. We handle open cell and closed cell foam, bag it, and leave the loft ready for new insulation. If a surveyor has flagged foam on your mortgage report, we can usually get eyes on it this week.

Attic Spray Foam Removal in Weston super Mare is the controlled stripping of cured polyurethane foam from the underside of roof tiles, rafters and felt, followed by cleaning, drying and reinstating ventilation. Foam is cut back with a spray foam removal saw or oscillating multi-tool, pried off timber battens, then the dust and residue are captured with an industrial vacuum. We inspect the roof space with a thermal imaging camera before and after, because foam that looks sound on the surface often hides damp felt underneath.
Most Weston super Mare lofts we open up were foamed between 2008 and 2016, when spray foam was pushed as a cheap insulation fix. On the seafront side of town, driving rain and salt air push moisture into roof voids, and closed cell foam traps it against the timbers. That is why attic spray foam extraction Weston super Mare homeowners search for is usually a moisture problem, not an insulation problem. Left alone, trapped water rots rafters and kills roof ventilation.
Every removal job includes the survey, protection, extraction, cleaning and the lender report. New insulation is optional and priced separately, so you only pay for it if you want it.
We inspect the loft with a thermal imaging camera, check rafter moisture with a meter, and identify whether you have open cell or closed cell foam. You get photographs and a fixed written quote the same day.
Dust sheets through the house, a sealed loft hatch and negative air pressure keep debris out of your living space. We wear respirators and protective clothing and work to COSHH regulations on every visit.
Foam is cut with a spray foam removal saw and oscillating multi-tool, then lifted by hand where it has bonded. We finish with an industrial vacuum and dry ice blasting on delicate felt.
We clear the 50mm air gap between insulation and roof covering and check eaves vents are open. A thermal imaging pass confirms airflow before we sign the job off.
You receive a dated report with before-and-after photographs and moisture readings, formatted for mortgage lenders and surveyors. We can send it straight to your broker if you prefer.
All foam and contaminated material is bagged and removed through licensed waste routes. Nothing is left in your loft or fly-tipped, and you get the waste transfer note.
We attend your property, usually within 48 hours of your call, and inspect the loft with a thermal imaging camera. We identify open cell or closed cell foam, check rafter moisture, and photograph everything. You get a written fixed quote the same day, with no charge for the survey.
On the day, our technicians lay dust sheets through the house, seal the loft hatch, and set up negative air pressure so dust travels out, not down into your bedrooms. We wear respirators and protective clothing and work to COSHH regulations throughout. Setup takes around 45 minutes.
Foam is cut with a spray foam removal saw and oscillating multi-tool, then lifted off rafters and felt by hand where it has bonded. We use a dry ice blasting machine on delicate felt and a sand blasting rig on stubborn patches. A typical three-bedroom semi takes one to two days.
Every surface is vacuumed with an industrial vacuum, then wiped down. We leave ventilation open and, where moisture readings are high, run drying equipment for 24 to 48 hours. You get before-and-after thermal images showing the timbers and air gaps.
We issue a dated removal report with photographs, suitable for lenders and surveyors. If you want new insulation, we fit mineral wool or rigid insulation boards with a vapour barrier, keeping the roof ventilation path clear. Most lofts are finished within a week of the survey.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Cuts cured foam into manageable blocks without tearing the felt underneath. It is our first tool on almost every loft job.
Gets into rafter bays and around trusses where a full saw will not fit. Essential for closed cell foam bonded hard to timber.
Lifts foam residue off fragile felt and old timber without water or harsh chemicals. We use it where the roof covering cannot be replaced.
Captures dust and foam fragments at source. Combined with negative air pressure, it keeps debris out of your living space.
Shows moisture behind foam and confirms airflow after removal. Every job gets a before-and-after thermal pass.
Standard kit for every technician on site, worn under COSHH regulations whenever foam is being cut or vacuumed.
A three-bedroom semi in Milton had closed cell foam sprayed across every rafter. The buyer's lender refused the mortgage outright, and the chain was days from collapsing. Rafter moisture readings sat between 21 and 24 percent.
We removed the foam over two days, dried the timbers and restored the eaves air gap. Final readings came back at 11 to 13 percent. The dated report went to the lender, and the sale completed three weeks later.
A landlord in Worle had a recurring damp stain on a bedroom ceiling. Two roofers had looked at the tiles and found nothing wrong. The real cause was open cell foam trapping condensation against the felt.
We stripped the foam in a single day, vacuumed the void and reopened the ventilation path. Thermal images showed the felt drying within 48 hours. The ceiling was repainted a fortnight later and has stayed dry through two winters.
Foam had been in an Uphill loft for around ten years. The upstairs bedrooms had a faint chemical smell that got worse in warm weather, and the family had stopped using two of the rooms.
We removed the foam, gave every surface a full industrial vacuum and left the loft ventilating for 48 hours. The smell cleared within two days. The family moved back into both bedrooms the following week.
Foam causes four problems we see again and again in Weston super Mare lofts. All four get worse with time, and all four are fixable once the foam is out.
Ask a pro →We remove the foam, dry the timbers, and issue a dated photographic report in the format lenders accept. Most Weston super Mare sales we unblock complete within three weeks of extraction.
Stripping the foam reopens the ventilation path. We clear the air gap, check eaves vents, and confirm airflow with a thermal imaging camera before we leave.
We expose every rafter, take moisture readings, and dry the timber with controlled ventilation. Any rafter needing treatment is flagged in the report so you can get it sorted quickly.
Removal plus a full industrial vacuum clears the source. Customers in Worle and Milton often report the upstairs air smells different within a day or two of the loft being cleared.
Most Weston super Mare lofts cost between 900 and 2,400 pounds to clear in 2026, with larger or heavily foamed roofs reaching 3,500 pounds. Price depends on foam type, loft size, access and whether felt needs dry ice blasting. We survey free of charge and give you a fixed written figure the same day.
Yes. We remove open cell and closed cell spray foam from lofts across Weston super Mare and the wider Somerset area, including Worle, Milton, Uphill and Bleadon. We cut, vacuum and clean the roof void, then issue a dated report. Most jobs are booked within a week of your survey.
It is. Our crews cover Weston super Mare and roughly 20 surrounding neighbourhoods, so attic spray foam extraction near me Weston super Mare searches usually get a survey slot within 48 hours. We also run a 24/7 line for emergency water ingress through foamed roofs. Call 0193 424 5129 and we will confirm the next available visit.
A standard three-bedroom semi takes one to two working days on site, plus 24 to 48 hours of drying where moisture readings are high. Larger detached lofts or heavy closed cell foam can run to three days. You get the removal report within 24 hours of the final clean.
Free survey, fixed written price, and a report your lender will accept. We are CHAS accredited and fully insured, and we answer the phone 24/7 on 0193 424 5129. If a sale is stalling, tell us the deadline and we will work to it.
Book a Free Survey 0193 424 5129 →Call 0193 424 5129 or email [email protected] and we will book a survey at a time that suits you. We answer the phone between 8am and 6pm Monday to Friday, and the emergency line stays open for urgent lender deadlines and water ingress. Most Weston super Mare surveys are booked within 48 hours.