Fast, clean extraction for lofts, roofs and cavity walls across Somerset.

Spray Foam Removal near me in Weston super Mare

Spray Foam Removal near me in Weston super Mare is what we do every week, from Worle lofts to Uphill bungalows. If a surveyor has flagged foam in your roof, or you have bought a house with foam and cannot get a mortgage, we take it out, clear the dust and leave the timbers ready for a proper breathable insulation system. We cover Somerset and the whole BS22, BS23 and BS24 patch.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Spray Foam Removal near me you can count on
Careful work. Honest options.
About this service

What Spray Foam Removal near me in Weston super Mare involves

Spray Foam Removal near me in Weston super Mare is the controlled cutting, breaking up and extraction of cured polyurethane foam from roof voids, lofts, rafters and cavity walls. We start with a thermal imaging camera survey to map where the foam sits and how deep it goes, then cut it back with a spray foam removal saw and oscillating multi-tool before vacuuming every crumb into an industrial vacuum. Timbers are then checked for rot and condensation damage, and we tell you honestly whether the roof structure is sound or needs repair.

Most Weston super Mare jobs come from three situations: a mortgage lender refusing to lend on a foam-insulated roof, a loft that has started to smell damp because closed cell spray foam has trapped moisture against the rafters, or a homeowner who simply wants the old foam gone before fitting modern insulation boards. Because Weston sits on the coast, salt-laden air and driving rain make roof ventilation problems worse, and foam that was sprayed in the 1990s and 2000s is now failing in a lot of BS22 and BS23 properties. If you have been searching for spray foam removal near me Weston super Mare, we can normally survey within 48 hours.

  • ✓ Mortgage and survey friendly
  • ✓ Roof ventilation restored
  • ✓ Timber rot caught early
  • ✓ Clean, dust-controlled extraction
What's included

What our spray foam removal service includes

Every job is quoted as a complete package, so you are not paying extra for waste disposal or paperwork later. Here is what comes as standard on a typical Weston super Mare loft removal, and what we would quote separately if your roof needs it.

✓

Free thermal imaging survey

We visit, take thermal images of the roof void and measure foam depth and coverage. You get a written fixed price the same day, usually within two hours of the survey. No charge and no obligation.

✓

Full foam extraction

Cutting, breaking up and vacuuming of all accessible spray foam, including open cell and closed cell types, using a spray foam removal saw, oscillating multi-tool and industrial vacuum with HEPA filtration.

✓

Timber condition report

Every rafter, purlin and batten we expose is inspected for rot, staining and insect damage. Anything suspect is photographed and flagged to you the same day, with a clear recommendation on repair.

✓

Waste removal and disposal

All foam, dust and debris is bagged and removed from site the same day, disposed of through licensed waste routes. You do not need to hire a skip or arrange a separate collection.

✓

Lender and surveyor documentation

Before-and-after photographs plus a signed written summary confirming the foam has been removed and roof ventilation restored. Accepted by lenders and surveyors across Weston super Mare in the majority of cases.

✓

Full clean-down

Floors, stairs and landing are sheeted before we start and vacuumed on the way out. Loft hatch, surrounding walls and the route through your house are left as we found them, minus the foam.

How it works

How our spray foam extraction process works

01

Survey and quote

We visit, take thermal images of the roof void and measure how much foam is present. You get a written price the same day, usually within two hours of the survey. No charge for the visit, no pressure to book.

02

Site protection

On the day, we sheet floors, stairs and landing, tape up the loft hatch and set up negative air pressure so dust travels out, not into your bedrooms. This stage takes 30 to 45 minutes on a typical Weston semi.

03

Foam cutting and extraction

We cut the foam into manageable blocks with a spray foam removal saw and oscillating multi-tool, then feed it into an industrial vacuum and bag it. A standard 60 square metre loft takes one to two days depending on foam thickness and access.

04

Timber inspection

With the foam gone we inspect every rafter, purlin and batten for rot, staining and insect damage. Anything suspect is photographed and flagged to you the same day, with a clear recommendation on repair or replacement before new insulation goes in.

05

Clearance and handover

We remove all waste, vacuum the loft and landing, and walk you through the finished roof space. You get before-and-after photos plus a written summary for your lender, surveyor or buyer. Most jobs are signed off the same afternoon.

Tools & methods

Tools and methods we use for foam extraction

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Spray foam removal saw

Cuts cured closed cell foam into manageable blocks without tearing the timbers underneath. Essential on dense foam that has been sprayed directly onto rafters.

Oscillating multi-tool

Gets into corners, around pipework and behind battens where a saw will not reach. Lets us remove foam cleanly without cutting into wiring or felt.

Industrial vacuum with HEPA filtration

Captures fine foam dust at source so it does not travel into bedrooms. Run continuously throughout the job and used again for the final clean-down.

Thermal imaging camera

Maps where foam sits, how deep it goes and where moisture is trapped against the timbers. Used at survey stage and again after removal to confirm the roof has dried.

Respirator and protective clothing

Foam dust and off-gassing are health hazards. Every technician wears a fitted respirator, coveralls, gloves and eye protection for the full shift.

Dry ice blasting machine

Removes foam residue from delicate surfaces such as wiring, pipework and fragile felt without abrasion. Used where a saw or multi-tool would risk damage.

Sand blasting equipment

Strips stubborn foam residue from brick, stone and concrete walls. Mainly used on commercial units, garages and cavity wall jobs.

Real results

Before and after.

Milton loft cleared for mortgage

Before

A 55 square metre loft in Milton was packed with closed cell foam sprayed directly onto the rafters. The buyer's lender refused the mortgage and the sale had stalled for six weeks. Condensation was dripping off the felt and two rafters showed early staining.

After

We removed all the foam in a day and a half, cleared the vents and confirmed airflow at the eaves. The two stained rafters were treated and monitored. The lender accepted our photographic summary and the sale completed three weeks later.

Worle rental damp problem solved

Before

A landlord in Worle had two rental properties with foam in the loft conversions. Tenants were complaining about a musty smell and damp patches on the bedroom ceilings. The foam had been in place for over fifteen years and had trapped moisture against the plasterboard.

After

We extracted the foam from both lofts over three days, replaced two sections of damaged plasterboard and cleared the vents. The damp smell disappeared within a week and both properties passed a follow-up inspection.

Uphill bungalow roof restored

Before

A bungalow in Uphill had foam sprayed onto the roof felt in the early 2000s. Salt air and trapped moisture had caused the felt to perish and three rafters had started to soften. The owner was told the whole roof might need replacing.

After

We removed the foam carefully with a multi-tool, exposed the timbers and found only three rafters needing treatment rather than replacement. New felt was fitted over the affected section and the roof was left to breathe.

Problems we solve

Problems we solve with spray foam extraction near me

Foam that was sprayed in good faith twenty years ago is now causing real problems in Weston super Mare homes. These are the four we see most often, and what we do about each one.

Ask a pro →
01

Mortgage refused because of spray foam

We remove the foam, photograph the exposed roof structure and issue a signed summary confirming ventilation has been restored. Most lenders and surveyors in Weston super Mare accept this documentation and release the mortgage without a second visit.

↗
02

Loft condensation and damp patches

We cut the foam out, clear the eaves and ridge vents and check airflow through the whole void. Once the roof can breathe again, the loft dries out naturally. We also advise on vapour barrier and insulation boards to stop the problem returning.

↗
03

Timber rot from trapped moisture

We inspect every timber we expose and mark anything soft, stained or splitting. Catching rot at the surface stage is far cheaper than replacing a rafter that has gone through. We flag repairs clearly and quote them separately.

↗
04

Difficulty selling the property

Removing the foam before you list takes the issue off the table. We provide the paperwork buyers and their lenders want, and we can usually complete a standard loft within two days of starting so your sale stays on schedule.

↗
Proof you can check

Accredited, insured and locally accountable

✓
BPCA certificationBritish Pest Control Association
✓
CHAS accreditationCHAS
✓
Constructionline registrationConstructionline
✓
SafeContractor approvalSafeContractor
✓
PASMA and CSCS cardsPASMA and CSCS
Good questions

Frequently Asked Questions

0193 424 5129 →

Search for a local contractor who has done foam extraction in Somerset, not a general builder. Ask for before-and-after photos, confirmation they carry CHAS or SafeContractor accreditation, and a fixed written price. We cover every BS22, BS23 and BS24 postcode and can usually survey within 48 hours of your call.

Yes. We run a dedicated extraction service across Weston super Mare and the surrounding villages, including Worle, Locking, Banwell, Winscombe and Churchill. We use a spray foam removal saw, oscillating multi-tool and industrial vacuum with HEPA filtration, and we remove all waste the same day. Typical lofts take one to two days.

Typical 2026 pricing for a standard 60 square metre loft runs between 1,800 and 3,500 pounds, depending on foam thickness, access and whether timber repairs are needed. Cavity wall extraction and large commercial roofs cost more. We give a fixed written quote after a free survey, so you know the number before we start.

Same day starts are possible if you call before 10am and the loft is accessible, though most jobs are booked within 48 hours. If you are facing a mortgage deadline or a surveyor's re-visit, tell us on the phone and we will prioritise your job. We also offer same day spray foam extraction near me Weston super Mare for urgent cases.

Ready when you are

Book Spray Foam Removal near me in Weston super Mare today

Call Crown Insulate Spray Foam on 0193 424 5129 for a free survey and a fixed written price. We cover every BS22, BS23 and BS24 postcode, hold same day slots for urgent mortgage cases and leave your loft clean, documented and ready for new insulation.

Get a free quote 0193 424 5129 →
Request an appointment

Contact Crown Insulate Spray Foam

Call 0193 424 5129 or email [email protected] and we will book a survey at a time that suits you. We answer the phone between 8am and 6pm Monday to Friday, and the emergency line stays open for urgent lender deadlines and water ingress. Most Weston super Mare surveys are booked within 48 hours.

Call anytime0193 424 5129Email the office[email protected]
Office hoursOpen 24 hours · 7 days a week
Request received — our team will be in touch shortly.
Tap to call0193 424 5129